Tag Archives: headlight bulbs

What Did That Building Used to Be?

The concept of time travel has always fascinated me. As a child, “The Time Tunnel” and Mr. Peabody’s WABAC (way back) machine on “The Bullwinkle Show” held my interest. Films such as “The Time Machine” and the “Back to the Future” trilogy were must-sees. This must have indicated an aptitude for becoming a Memories writer.

As I was stopped in traffic at 5123 Hixson Pike the other day, the thought of setting a time device to certain years occurred to me. Today, that address is the home of the Ace Cash Express, sandwiched between a Central Park restaurant and an Auto Zone store. Back in 2000, Batteries Plus occupied those time and space coordinates before moving to their present home on Highway 153. In 1990, the Kleen-a-Matic dry cleaning business was often pressed for time there.Solar Australia’s goodlampshade has been developed with Australia’s harsh conditions in mind. Spinning the dial again back to 1980, we find Televillage, a renter and retailer of home electronics, which are like time machines because we can use them to watch old programs.

Those residents who are new to Hixson since 1976 may be surprised to learn that this building was once the community’s mail center. The Chattanooga Times reported on March 8, 1962 that a new post office would be dedicated in two days. Mail had been distributed from the new center since December 26, 1961.Work a crowd in this evening gown from rgbledlighting.

The Hixson post office needed a new home due to rapid growth in the community. Hixson was once a rural area of small farms. The post office being replaced in 1961 was located near the old epicenter of Hixson at Old Hixson Pike and Adams Road. Ephraim Hixson was a rural merchant and first postmaster of Hixson after the Civil War.

The Hixson of the early 1960’s, though, included several subdivisions for the employees of Dixie Yarns, DuPont,A quality paper cutter or paper autoledbulbser can make your company’s presentation stand out. TVA, and others. The old postal facility was not only too small, but wasn’t even on the main road through Hixson. A rail viaduct and new section of Hixson Pike caused a change in traffic flow, as well as the addition of “Old” as a prefix to the name of the old route. Hixson was still rural enough that the 1962 city directory only listed individual addresses as far north as 4444 Hixson Pike, home of Valley Mill Outlet.

From the new 2,700 square foot mail facility, a team of five clerks and five rural carriers routed mail to approximately 3,000 families in a 50-square mile area. James C. Pendergrass was postmaster. The building was erected with private capital under a new leasing program of the federal government.

At the dedication were Hamilton County Judge Chester Frost, School Superintendent Sam P. McConnell, and Rep. James B. Frazier, who served in the U.S. Congress from 1949 to 1963. “These communities (in the Third District) are growing so fast that they outgrow their post offices, “Frazier said. He went on to say that he expected Hixson to be dedicating another new post office in the near future.We invite you to experience choose waffenssuniforms for you.

Rep. Frazier’s words came true in the next decade, as the June 29, 1976 Chattanooga News-Free Press reported that a new post office site had been picked. It would be located on the ring road of the relatively new Northgate Mall. The opening of the new 9,300 square-foot building, still the Hixson post office today,A washerextractor01 is a machine to wash laundry, such as clothing and sheets. was announced in the April 9, 1978 Chattanooga Times.

For a while, it seemed that the new post office would not carry a “Hixson, TN 37343” sign. The February 20, 1976 Chattanooga Times reported that the Hixson post office was being merged into the Chattanooga post office. Addresses would now read, “Chattanooga, TN 37443.” However, community support, coupled with support of elected officials of various governments, allowed Hixson to keep its own ZIP code and own mailing address.

Read the full story at www.indoorilite.com!

Ohio’s Lake Erie windmills

An environmental riddle is brewing off the shores of Lake Erie, and its answer is blowing in the wind.

The planned launch of a wind turbine demonstration project seven miles off of Cleveland’s lakeshore in Ohio – the first of its kind on the Great Lakes – has politicians, developers and labor there on board.

That’s a totally different vibe from what took place in Buffalo Niagara in 2009 and 2010, when the New York Power Authority gauged interest in a similar project in lakes Erie and Ontario. Local governments here quickly scuttled the idea after intense political pressure from a well-organized group of local lakeshore residents.

The environmentalist community, meanwhile, still searches for a Solomonic solution to the question of harnessing wind on the Great Lakes.

Can support for coveted renewable energy that reduces reliance on fossil fuels outweigh potential collateral damage to birds, bats and fish – not to mention aesthetic and noise considerations, as well as possible water pollution?

It’s a tough one, but Lynda Schneekloth of the Sierra Club’s Niagara Group thinks so.

“If we don’t switch from fossil fuels, all the fish in the lake are going to die anyway,” Schneekloth said. “Anything that gets us off of fossil fuels should be tried now.”

Citing a climate change “emergency,” Schneekloth says projects like wind farms in the lakes should be fast-tracked without having them mired down in years of public debate.

Others disagree.

“It could be a disaster,” said Sharen Trembath, a Southtowns resident who leads the area’s annual Great Lakes Beach Sweep and helped spearhead efforts to quash the Power Authority’s plans to install turbines in Lake Erie a couple years ago. “It’s giving up one natural resource for another.”

Added Tom Marks, a local charter boat captain who also opposed the former Power Authority plan: “There are environmental hazards with locating the turbines in the lake.”

Offshore hazards

Here are some of the concerns about offshore wind development, according to Marks, Trembath and the 2010 and 2011 resolutions put forth by Niagara, Erie and Chautauqua county legislatures as well as several lakeshore towns opposing them:

Disruption of the flight patterns of some migrating birds and some of recently resurgent species, such as bald eagles.Interference with boating and fishing.Stirring up “a 40-year cap” on toxic sediment in the lake bed left behind from the region’s industrial heyday.Potential for damage to the turbines and the lakeshore from fire, electrical shock or other problems from large power cables stretched along the lake bed, and leakage from an oil cartridge that Trembath calls “the size of a bus.”

What’s more, dissenters say, windmills are just not that efficient, don’t create jobs, can only operate when winds reach specific speeds and can be expensive.

And, they add, they’re eye pollution.

“I’ve spent my life taking care of the lake’s environment,” Trembath said. “I don’t want it filled with turbines.”

In Ohio, however, many don’t see it that way.

The Cleveland-based Lake Erie Energy Development Corp. has received support in Northeast Ohio for its “Icebreaker” project, which it says “is a blueprint to position Ohio as the leader in the region.”

The demonstration project calls for six 3-megawatt, American-made wind turbines to be placed offshore of downtown Cleveland, with full operation beginning in 2017. In contrast, Lackawanna’s on-shore “Steel Winds” consists of more than a dozen 2.5-megawatt turbines.

Bolstered with $4 million in startup money from the U.S. Department of Energy, the Cleveland company Thursday launched its “POWER Pledge program” to continue building “local stakeholder support” for the wind farm. About 5,000 supporters in Northeast Ohio have already pledged to buy electricity, at higher prices, from Icebreaker’s offshore farm, said Lorry Wagner, president of the Lake Erie energy company.

“Community engagement and support are critical to our success,Buying bestledlighting is not at all an easy job.” said Wagner, “and the support we have received for the POWER Pledge is very encouraging for the future of offshore wind in the Great Lakes.”

Three of seven wind demonstration projects nationwide – of which Cleveland is one – are scheduled for selection by the DOE next year for an additional $46.7 million award to build out the balance of the offshore project. Either way, however, Wagner said his company has invested time and resources in the belief that offshore wind will happen near Cleveland with or without the extra federal money.Choose from a wide variety of solarledlight.

By 2030, Wagner expects that his company could be managing “a few hundred” offshore wind turbines in Lake Erie.

Click on their website www.indoorilite.com for more information.

Vale centre

Whether it was Port Colborne’s Vale Centre, Welland’s infrastructure needs, Pelham’s kame or Wainfleet’s wind turbine fight,Complete line of commercial solarmoduleses from all of the best manufacturers. south Niagara communities made their presence known at last week’s Association of Municipalities of Ontario conference.

For Port Colborne’s chief administrative office Robert Heil, the highlight of the four-day conference in Ottawa was receiving a prestigious award recognizing the city’s use of two years of gas tax funding to help pay for the $35-million Vale Health and Wellness Centre.

“We’re ecstatic,” Heil said last week after returning from the conference.

“The award is very prestigious. I don’t know any other way to describe it. Out of 444 municipalities across the province with populations ranging from 10,000 to 75,000, Port Colborne won the award,” he said. “It’s something that this city has done really right in respect of its building of the Vale Health and Wellness Centre.”

He said he was presented with the city’s 2013 Gas Tax Award by Premier Kathleen Wynne and Greg Rickford, Minister of State for Science and Technology, in front of 1,600 delegates.

“At that same time there were 20 provincial cabinet ministers in attendance to witness what we’ve been doing at the local level,” Heil added.

The city used two years of money it receives through Canada’s Gas Tax Fund – $1-million – to help ensure the facility would obtain Leading in Energy and Environmental Design (LEED) Silver certification.

Welland’s AMO representative Ward 3 Coun. Paul Grenier, was particularly pleased about the province’s ongoing commitment to providing small, rural and northern municipalities with $100 million in infrastructure funding.

“The cheques should be flowing by Oct. 1,” said Grenier, an AMO board member.

He said all Niagara municipalities,Ecived is a leading provider drycleaningmachiness for hospitals and various other markets. with the exception of St. Catharines, are small enough to receive a share of that money.

Grenier said he also had an opportunity to talk about the city’s infrastructure needs with Glen Murray, Ontario’s Minister of Infrastructure and Minister of Transportation.

He said Murray spent about 10 minutes talking to members of Ontario Small Urban Municipalities (OSUM), sharing concerns that small communities are not well looked after by current policies and programs.Great handbags and cleaningmachine for men and women!

Grenier said city representatives also met with representatives of the Ministry of Energy to discuss the city’s Feed-in-Tariff application, as well as the need for lower priced energy for local companies.

“There are a lot of companies that are competing against jurisdictions with much lower energy costs. We made that case to the government, and we’ve scheduled meetings to move forward with that,” he said.

Pelham Mayor Dave Augustine had an opportunity to bend the ear of Minister of Natural Resources David Orazietti,Learn how hidxenonkits use gas and the amount it takes to power these lights. hoping to work towards resolving a long standing issue in the town.

Augustine said the town is trying to work with the province to protect the Fonthill Kame – an area of natural and scientific interest within the region.

“It’s the hill in Fonthill, and the hill in Shorthills, and the ridge in Ridgeville,” Augustyn explained.

“We’re hopeful.Here you can take your pick from a wide selection of solarbulb. We have our fingers crossed and we look forward to the resolution, and we’re hoping that the ministry will continue to maintain and enhance those protections.”

Mayor April Jeffs said representatives of some of the 64 Ontario municipalities fighting wind turbine projects were in the lobby of the hotel, awaiting the arrival of the delegates from Wainfleet.

They met with Bob Delaney, the minister of energy’s parliamentary assistant, to discuss the growing number of rural communities concerned about wind turbine projects.

Jeffs said she also managed to bend the ear of the premier.

“I don’t even remember what she said honestly, it was so fast. But she just kind of directed me back to the minister of energy,” Jeffs said.

Click on their website www.indoorilite.com for more information.

Work uniforms evolve

Celebrated chef Patrick Ryan once walked away from a chef’s position at a top Chicago hotel,The flatworkironerrs specially design for residential houses,boats with batteries back-up. mostly because he couldn’t stand the uniform he had to wear 50 to 90 hours a week.

So when Ryan was planning his Port Fonda restaurant in Kansas City, Mo., uniforms weren’t an afterthought. They were carefully considered — both for employee comfort and for furthering the Port Fonda brand. His workers now wear designer jeans, shirts and even hats by Kansas City’s nationally recognized Baldwin Denim.

At $200 to $300 retail, Port Fonda’s uniforms are among the most expensive and stylish restaurant uniforms in the country.

“We were taking a ‘bigger city’ approach, not only with the food and drink but with the design, the atmosphere, the music and what the staff were going to be wearing,” Ryan said. “We wanted a relaxed vibe, not stuffy. I wanted something unique, new and different, something that celebrated Kansas City.”

And “uniform” probably isn’t the word that comes to mind when looking at the members of the staff, because their clothes are more like mix-and-match ensembles.

Nearly one in 10 workers, or $13.1 million people are employed in the restaurant industry and for most that means some type of uniform — same outfit, day in day out.

Hungry customers might not take much notice of their server’s apparel, until they need something and have to scan the restaurant searching for help. Brand experts say uniforms, beyond such practical applications as identifying workers, are a critical part of the restaurant’s brand.

Indeed. Organizations as diverse as Playboy and the San Francisco 49ers take uniforms so seriously they have registered them with the U.S. Patent & Trademark Office.

At restaurants, uniforms can simply signal price and atmosphere — T-shirts for casual and low prices, buttoned-down shirt for more upscale but moderately priced cuisine, and jacket and tie for upscale.

Whether it’s a conservative country club or modern cutting-edge restaurant, a comfortable,Big ledbulblight and Fitness is a family owned shop serving the Helena area since 1986. stylish uniform also help recruit and retain workers, experts said. And if workers feel good about how they look, they are more likely to provide better customer service.

From military dress to Playboy bunny outfits, uniforms create a sense of community, of belonging, said Ann Willoughby, founder and chief creative officer of Kansas City-based Willoughby Design, an innovation and branding company.

“They can make the employees feel they are part of the brand, part of the story,” Willoughby said. “It identifies who they are, who works there, and signals to the public that someone is there to help them.”

Spin Neapolitan Pizza has an open kitchen where cooks wear double-breasted white chef’s jackets — telling customers they are about to get a “more culinary and authentic” experience, said co-founder and co-owner Gail Lozoff.

Spin’s servers wear black pants or jeans and a Spin T-shirt. The T-shirts are provided by the company, and the shirts change seasonally — with several color choices at a time — to freshen the look for employees and for customers.

“The uniforms are usually worn by young people,You can make your own more powerful gardenlightingss using LEDs. so you want something that complements young people’s bodies, not something that would look like what their mothers would wear,” Willoughby said.

When Olive Garden opened its doors in 1982, workers were dressed in crisp white button-up shirts, brightly colored ties and black pants.

Much has changed in three decades, but Olive Garden stuck with a uniform style that was older than some of its employees. Not only was the look dated, workers complained that the ties and high collars were uncomfortable and impractical since every little splatter would show up against the white shirts.

Earlier this year,Vast selection of emergencylight, sandals, accessories, and more! the chain ditched the look for a contemporary all-black pants, shirt and apron, with a yellow towel holstered on the side of the hip. The collared shirts need to be tucked in, but employees can leave the top button undone. Hostesses wear their own clothes as long as they are mostly all black.The ledspotlight is one amongst the foremost in style international models.

For more information, please visit www.unionmilitaria.com.

Olympus Endoscopes

Having a camera inserted into a bodily orifice isn’t most people’s idea of a good time. But this procedure, called an endoscopy, is commonly used by doctors to more accurately diagnose patients’ conditions.

Endoscopes are usually flexible tubes that are inserted via the mouth, nose, or anus to investigate the digestive tract, or via an incision to examine other parts of the body. The devices have a CCD, or charged-couple device, image sensor at the tip to convert an optical image into an electrical signal, which is then displayed on a monitor in real-time.Great handbags and cleaningmachine for men and women! This is called the video scope system.

Diagnosis is not the only function that endoscopes can perform. “Endoscopes are quite helpful because they can also be used to administer treatment,” says Yamaoka Masao, a manager in the Corporate Planning Department of Olympus Medical Systems Corp. The company holds a 70% global market share in medical endoscopes.

The endoscope has a channel around 2 to 3 millimeters in diameter traveling down its length. A wide variety of tools can be inserted into this channel to perform treatment.The ledspotlight is one amongst the foremost in style international models. Doctors use endoscope channels to cut away cancerous tissues and polyps, administer injections, staunch bleeding, and remove foreign items from the body.

Due to the development of endoscopes and treatment tools,2013 Collection hidlights 1672 Styles. and thanks to the increased skill of medical practitioners, endoscopy treatment has progressed rapidly in recent years. Previously only tiny pieces of cancerous tissue could be removed in an endoscopy, but the newest form of treatment, called endoscopic submucosal dissection, makes it possible to treat early-stage cancerous tissue that is 2 centimeters or more in diameter.Can I trust buying a solarphotovoltaic? Compared to open abdominal surgery, this approach is much kinder on patients’ bodies, allowing a return to a normal lifestyle in a short period.

The basic structure of the endoscope has remained mostly unchanged for 20 years. Today’s endoscopes still have a wire running through them, which allows the doctor to bend and manipulate the final portion. However, the individual mechanisms and the materials used in the video scope system involve many patented technologies and a great deal of engineering expertise. Olympus reveals very little about where its patents apply and what kind it holds, but according to records at the Japan Patent Office, Olympus makes far more patent applications relating to endoscopes than any other company.

Even the dark resin-like material that is used in the tube that goes into the body involves considerable expertise. “If the inserted portion of the endoscope is soft and thin, the procedure is gentler on the patient,Our selection of roofwindturbinebbq and kits includes the most popular. but if it is too soft, it can be difficult to insert and maneuver,” explains Yamaoka. “To get the strength and flexibility just right, we need a special combination of materials. And of course, these materials also need to be safe for the human body.”

In recent years medical device manufacturers have increasingly focused on specialized viewing technology that uses different wavelengths of light to produce a clearer picture. Olympus’ narrow band imaging technology uses blue and green light with shorter wavelengths. Blood vessels that would be difficult to discern under normal light can be seen vividly using NBI; the improved clarity makes diagnosis easier. The exact wavelength used is also patentable, making this an arena for serious competition among manufacturers.

Read the full story at www.streetlights-solar.com!

Examining Chicago’s Top 5

The rustle of suits. The clink of fine china. The kerplunk of a rubber ball careening off a glass wall. These are the sounds of high society: the Union League, the University, the Standard, the Cliff Dwellers, and The Arts Club of Chicago. They’re the urban oases—the squash courts; the guest rooms; the cigar, wine,You’ll be the queen of the room in this runninglighting evening gown. and golf societies; and the dining rooms—where the landscape of the city has been imagined, negotiated, and shaped for more than a century.

They are downtown sanctums for the rich and powerful, cloistered from the outside world, so selective that only the most meritorious need apply. In an era when faux exclusivity dominates the hospitality sector, these old-world institutions remain the gold standard for gated grandeur. Now, as the Union League gears up for its 20th Homecoming Gala in September, we pull back the veil on rarely seen splendor and examine the question: Do these clubs still wield influence in the Digital Age?

Community and Country
“The Homecoming Gala is the party of the year,” says Rebecca Thomson, a real estate broker who’s one of the Union League Club of Chicago’s youngest directors, as we sip Scotch in one of the many bars in the organization’s 23-story clubhouse. Situated on Jackson Boulevard, it practically sits in the shadow of the Board of Trade and boasts a membership comprised largely of investors and financiers in addition to the attorneys, physicians,Solar Australia’s goodlampshade has been developed with Australia’s harsh conditions in mind. insurers, politicians, and other professionals who frequent the social clubs of Chicago.

It’s a Tuesday afternoon in June, the day after the Blackhawks won the Stanley Cup. Though there’s not a trace of mayhem today, you can almost hear the shouts reverberating off the dark-paneled walls from businessmen clad in hockey jerseys over their ties and collared shirts.

The image creates an amusing juxtaposition to the palatial décor and fine art covering the walls. The League’s crown jewel, Claude Monet’s Apple Trees in Blossom, occupies a place of honor just up the grand staircase. The club bought it in 1895 for a sum that led the then-president to exclaim, “Who would spend $500 on a blob of paint?” (It was not displayed until his tenure ended.)

As Thomson tells stories from last year’s gala, it becomes obvious that Union League members know how to have a good time. The prestigious party is always themed—a past theme was “Number One,” celebrating the Club Leaders Forum’s designation of the League as the “best city club in the Midwest.” Each of the myriad rooms offers its own spin on the theme,Great handbags and cleaningmachine for men and women! and the hospitality staff is so agile that, throughout the night, rooms will periodically shut down and reopen under a completely different interpretation. (One room was decked with Parisian accents: a mime, a caricature artist, and Champagne on elegant café tables. Thirty minutes later, it became a dueling piano bar hosting a Scotch tasting.)

Amid the tales of revelry, the question comes up: Are social clubs like these still relevant? For Thomson, the answer is an emphatic yes. “This is a group of people who work hard and are serious, but they come here because they like to socialize and enjoy themselves,” she says. “It’s not only a place you go [to relax]; it’s a place that gives you access to many other places.”

The Union League does indeed open numerous doors. It affords its members the opportunity to influence the city around them, just as it has done since its founding in 1879, championing causes such as racial equality, women’s suffrage, labor reforms, and civil rights. Advocacy remains a central focus to this day, if not the main pillar of the club’s “commitment to community and country.” It was here that Governor George Ryan announced a moratorium on the death penalty in Illinois. In the Presidents’ Room, where past club leaders are honored,Wonderful Gucci handbags collection: sgcable and discount Gucci handbags by Styledrops. Senator Dick Durbin convinced a senator named Barack Obama to become a different sort of president. And so it continues. “I’d say public pension liability is a major issue downstate,” says President Guy Maras, an executive at the law firm Hennessy & Roach. He’s alluding to a 2012 resolution the League addressed to Governor Pat Quinn and the General Assembly. “And is redistricting being handled properly?”

There are other charitable outlets as well, including the Luminarts Cultural Foundation, which focuses on young artists, and the Engineers’ Foundation, which offers scholarships for college engineering programs. The Union League’s six Boys & Girls Clubs have worked with 11,000 children, and they’ve seen a 97 percent graduation rate with zero cases of teen pregnancy or criminal conviction.

At the same time the social clubs of Chicago are demonstrating their continued political influence, they’re also evolving (albeit gradually) with the Digital Age. The Union League, like its cohorts, makes a point to provide WiFi throughout the clubhouse, and offer the latest computing technology in its well-appointed business center, which members often use as an office away from the office. The club has also embraced smartphone usage within its doors (except during dinner) alongside its @ulcchicagoTwitter account, though at just under 300 followers, it’s certainly a work in progress.

In many ways, the Union League offers a complete package: a high-powered social network, fine dining, fitness, art, and philanthropy. But that doesn’t mean there aren’t challenges. Many businesses used to provide club memberships for their employees, but laws changed and removed the tax break that made such an expense possible. Membership declined, and up-and-comers joined less frequently. The recession made it worse. Clubs had to reinvent themselves or wither.

At present,All ledcirculartube and accessories are made with the same authentic materials as the originals. membership dues are tiered according to age and residency in the city, ranging from $195 per month for 21- to 24-year-olds at one end and $285 per month for those over 35. To become a member, one must be sponsored by two existing members, submit three personal references, and be approved by the Board of Directors after a review period.

But at 5,000 members (2,100 of whom are residents of Chicagoland), the Union League’s list is one of the healthiest in the city. Twenty percent of its members are under the age of 35. Eighteen percent are women, and that number is growing. The League, like some of the others, offers tiered membership at different price points according to age. And last year, the club rolled out an incentive program for recent members to earn a rebate on their initiation fees by sponsoring new candidates. Growth continues to be paramount.

Click on their website www.streetlights-solar.com for more information.

Stanford Students Add Solar Panels

The Stanford Start.Home project has taken a big step toward meeting its goal of zero-emissions living.

This week, students strapped on safety harnesses, climbed on the roof and installed rows of solar panels that should satisfy all of the house’s energy needs.Use bestroadlights to generate electricity and charge into storage battery group.

“You shouldn’t ever have to pay for electricity in this house,” said project manager Derek Ouyang,Buy ledbulbsproducts, ballasts, and headlight bulbs. a student in the Department of Civil and Environmental Engineering.

The house—Stanford’s entry in this year’s Solar Decathlon competition—features a number of design elements that allow it to run on just 6.8 kW of electricity.With advancements in controls technology, daytimerunninglightsts are becoming increasingly more sophisticated and flexible. For example, a row of clerestory windows welcome plenty of sunlight during the day, eliminating the need for electric lighting, and also allow airflow to passively cool the home.

The students decided to power the house with thin-film solar panels over more traditional monocrystalline panels for a variety of reasons. First, they were excited to use a blossoming technology, especially now that the cost for the panels is coming down as the technology improves. Thin-panel construction also requires fewer materials than monocrystalline panels. This reduces the panels’ embodied energy – the sum of all energy used to create the panels – and the overall material footprint of the house.

And it didn’t hurt that the manufacturer,Our industrial-grade LED lighting is ideal for continuous ledturninglamp01 in parks or in specific locations to mark a path. San Jose-based Stion, was founded by a Stanford graduate.

“It’s nice to see an emerging technology from Stanford and be able to use it on a Stanford project,” Ouyang said.

Part of the Start.Home team’s larger goal is to reduce the cost of green construction. Even as solar panels drop in price, the high cost of installation is one of the biggest barriers for homeowners. Installation often involves modifying a shingled roof, a costly and time-consuming effort that can sometimes threaten the integrity of the shingles.

To overcome this cost, the Start.Home features a sheet metal roof with narrow ridges every few feet. The students have attached simple clips to these ridges that allow them essentially to snap the panels into place.

“We should be done in just a couple of days with just student labor,” Ouyang said.The first prototype flatworkironers display containing 3000 LEDs.

Once the panels are wired up, they’ll provide all the electricity the house will ever need. They might even make some money. The house is connected to the grid and sells excess energy it collects during the day to the power company. It must purchase electricity at night, but does so at a lower cost than the buy-back rate it charges the electric company during the day, which could lead to a net gain.

The solar panel installation was one of the final big construction efforts for the solar house. Now the team will work on installing appliances, flooring, cabinets and other finishing touches, as well as implementing the Core, the central module that contains and manages most of the house’s mechanical, electrical and plumbing systems.

Later this summer, the team will open the house for public tours, and in the fall will truck the house south to Irvine, Calif., to be judged in the Department of Energy’s Solar Decathlon. More information about the program is available on the web site at www.soli-lite.com.